 
                            
                                            Add to Cart
Micro Vibration Sensor SW-18015P Vibration Sensor Switch Module
Description:
| Name | Vibroswitch sensor | 
| Working Voltage: | 3~5V | 
| Component model | SW-18015P | 
| Pin Dimension | 2.54mm | 
| Type | Vibration switch | 
| Material | PCB + Brass | 
| Size | 29 x 16 x 8 mm / 1.14 x 0.63 x 0.31 inch | 
| Color | Black | 
| Weight | 1 g / 0.04 oz | 
Introduction
 Vibration switch is mainly used in electronic toys, small appliances, sports equipment and a variety of anti-theft devices and other products. Vibration switch because they have a flexible and sensitive trigger, and become an integral part of many electronic products, electronic components.
Specifications:
1, the scope: small current vibration switch. Products sloshing around in the horizontal electrical changes produced in low current circuit (secondary circuit) with a vibration sensor.
 2 Operating temperature range: 5 ~ 70 º C Humidity 85 [%] or less.
 3 Storage temperature range: 15 ~ 45 º C Humidity 80 [%] following storage for 90 days.
 4 Test Status: Test and test if no special provisions under the following standard conditions Temperature: 5 ~ 35 º C Relative
 Humidity: 45 [%] to 85 [%].
The use:
 We first look at his specific pin functions
 Also the only three leads, connect the power, after a good ground, we received a digital signal output port on
 Can be used (we then use the 7th).
 Fourth, the module test
 Hardware Requirements
 Arduino controller × 1
 USB data cable × 1
 Vibration switch module × 1
 Led indicator × 1
 Here, everything is ready, we will now begin to build a test circuit bar
 Here we use it for a simple application that senses the vibration switch vibration LED is lit
 Lights to warn it, there are unusual circumstances happen? ?
 Well, look at the code under test it, maybe you can guess what will happen. . . . .
 int ledPin = 13; / / signal indicator output pin;
 int switchPin = 7; / / vibration switch input;
 int value = 0; / / latch vibration switch key;
 void setup ()
 {
 pinMode (switchPin, INPUT); / / Define port attribute;
 pinMode (ledPin, OUTPUT);
 }
 void loop ()
 {
 value = digitalRead (switchPin); / / read the key state;
 if (HIGH == value) / / there is vibration;
 {
 digitalWrite (ledPin, HIGH); / / steady state, led other off;
 }
 else
 {
 digitalWrite (ledPin, LOW); / / lit led lights;
 }
 }
 The program features: Let vibration switch vibration, you can see the arduino board 13 pin led lights are lit for a while,
 When the shaking soon will light or blink when.
Competitive Advantage:
1. Convenient & Friendly Customer Service
 2. Low Prices Direct From Factory Suppliers
 3. Fast Delivery Around the World. 
 4. High Quality With Global Standards. 
 5. 1 Year Factory Warranty
 6. Safe Shipping Way and Payment
  
Photos:



