Oky Newstar Technology Co., Ltd
Starter Kits,Controller Board, Sensor Modules Factory DIY Educational programmable Robot Projects manufacturer
Add to Cart
Nema17 stepper motor for 3D printer
Description:
) No MOQ limited
2) Short Lead-Time
3) Quickly response in time
4) Good Pre/After Sales Service
Specifications:
| Step Angle: | 1.8 Degree |
| Step Angle Accuracy: | ±5% (full step, no load) |
| Resistance Accuracy: | ±10% |
| Inductance Accuracy: | ±20% |
| Temperature Rise: | 80DegreeC Max. (rated current,2 phase on) |
| Ambient Temperature: | -20~+50DegreeC |
| Insulation Resistance: | 100M(Ohms) Min. ,500VDC |
| Dielectric Strength: | 500VDC for one minute |
| Shaft Radial Play: | 0.02Max. (450 g-load) |
| Shaft Axial Play: | 0.08Max. (450 g-load) |
| Max. radial force: | 28N (20mm from the flange) |
| Max. axial force: | 10N |
| Holding Torque: | 1.7~6.5 Kg.cm |
| Unipolar or Bipolar | |
