Oky Newstar Technology Co., Ltd
Starter Kits,Controller Board, Sensor Modules Factory DIY Educational programmable Robot Projects manufacturer
Add to Cart
3.3V-5.5V MAX3232 RS232 To TTL Converter Power Sensor Module With 4 Pin Dupont Cable
The RS232 serial port to TTL converter power module is a board with the MAX3232 transceiver integrated circuit (IC), which facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion. These boards usually have a DB9 connector soldered at one end, and four header pins with jumper cables at the other end. The jumper cables enable the user to connect the wires to a breadboard or a microcontroller project board, whilst the DB9 connects directly to a COM port of a computer.
The MAX3232CSE+ IC, which comes in a 16 pin narrow SO package. It requires between 3.0 V to 5.5 V to operate, and has two receivers and two transmitters. It has a maximum guaranteed data rate of 120 kbps, and the circuitry requires four 0.1µF charge-pump support capacitors. It is also pin compatible with the famous MAX232 IC.
These boards connect to systems with a UART; hence, they work with ATMEL and PIC microcontrollers.
It is widely used in radio modification, phone flash,for XBOX360 flash, GPS ,vehicle detection,DVD flash,
hard disk repair set-top box upgrade
It can be used to program STC MCU, NXP MCU, Renesas MCU,STM32 MCU, N+-2EC MCU
Communication chip: Domestic MAX3232
Port: TX RX VCC GND
Baud rate: Up to 150 KBps
Weight:36 g
TTL Header Pitch : 2.54mm / 0.1in
DB9 Connector Type: Female
Operating Voltage:3 V ~ 5.5 V
Maximum Datarate: 57.6 kbps (please see detailed test report)
Temperature range: -40°C ~ 85°C
we also provide ODM service.
Competitive Advantage:
1.Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around The Globe.
4. High Quality With Global Standards.
5. 3 year factory warranty
6. Safe shipping way and payment
More Products:
| UNO R3 + breadboard 400 point + 9V battery snap Starter Learning Kit | | HC-06 Bluetooth Wireless Module |
| Mega 2560 R3 ( CH340G ) | | HC-SR501 Human body Pyroelectric Infrared sensor PIR |
| DC 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Test Module | | Ultrasonic Sensor HC-SR04 |
| LCD 1602 I2C module (Yellow Green light) ( Red board module) | | 20cm Male TO Female 40Pin Solderless Jumper Breadboard Wires |
FAQ:
1. What is the delivery time?
Normally, 1-5 workdays after payment;
Special requirement orders, delivery time is negotiable.
2.If the products can’t work after receiving it,what should I do?
We will replace new items for you at once, and respect your final decision for wrong goods.
3.If the products don’t meet my demand after I received it,can I return it?
Yes,no problem.
You can return back to us, we will refund your full payment.